PicoBorg Reverse and DiddyBorg

Hello
What does this mean if i store the script with Run at startup?
Does it move until the RP3 is startet?
Can i store all script with run at startup or only one at the time?

Thanks

Hello
If i check the Raspberry Pi camera with following command:
raspistill -d
i don't see the image from the camera on the monitor for a few seconds.
Also i don't get an error messages instead.
I use the Raspberry Pi 5MP Camera-Module

Hello
Ist it possible to use the Web UI with an Mobile Phone Hotspot and a Laptop?

Thanks for the answer!
Greats from Switzerland 🇨🇭

Dear PiBorg,

I have a little trouble writing my own API to communicate with the motors via PiBorg Motorcontroller Reverse.
My code I am using.

https://github.com/Xhendos/GPIO/tree/master/Projects/PIBorgReverse

Its basicly at this part

Hello
First i do say that I'm a newbie with Raspberry pi!
I have several questions about the Diddyborg!
1. Which system is better? A Ultrasonic distance sensor (HC-SR04) with servo or three of them fix mounted?
2. I will use a TFT Display (https://www.adafruit.com/product/2441). So where On the Raspberry Pi do i plug the connector from the PicoBorg Reverse? The connector side of the Raspberry Pi 3 is used from the display!

I seem to have a faulty PBR. The Raspberry Pi isn't recognising the board. After running PBR.Init() I get the error:

Hi guys, I have some questions regarding the schematic of the PicoBorg reverse because mine is broken and i have to repair it.

I found the schematic on the forum (Attached to this topic), my question are:

just a quick question,

is it possible to use the webGui for the camera and to ps3 controller for movement?

thanks!

Hi, i have a "DiddyBorg Red Edition". I am pretty new to all this stuff and i am glad i got it running.

The problem atm is that if i hit the button to move straight forward, it moves a LITTLE bit to the left. So thats prolly up to my horrible robo building skills but i hope that there is a adjusment i can do in the config of my DiddyBorg. Like to move forward move 47% left and 53% right instead or something. I need the DiddyBorg for a presentation soonish.

I am glad for every tip.

Greetings

 $ sudo python  metalJoy.py
Loading PicoBorg Reverse on bus 1, address 44
Found PicoBorg Reverse at 44
PicoBorg Reverse loaded on bus 1
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:4259:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4259:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name