PicoBorg Reverse and DiddyBorg

Hi, I have a brand new PiBorg Reverse and have attached 12V to the motor power input terminal but the power output to both motors is constantly 10.58V no matter what I do. Even if i remove the 'all stop' jumper it still stays the same. I don't know if it means anything but I have never seen the led light up even on initial power up of the RaspberryPi.

Hello! I am making some, ahem, "extensive" ( ;-) ) modifications to my brand new Diddyborg Red!

I have installed a night vision (no IR filter) Pi camera. I'm trying to modify the diddyRedFollowBall.py program to follow a flashlight instead of a red ball (since red balls don't exactly look red, especially at night with the night vision activated).

I can't quite tune the colors on this line properly:

Hello
Its cool if we share picture of our vehicles!

Hy
How can we test the system with out damage pins or something?

Hello all,

I'm trying to follow a couple different tutorials to add the HC-SR04 to my DiddyBorg.

Unfortunately both want me to connect the HC-SR04 to the 5V pin 2, and both 5V pins are taken by the battery connector.

I've seen people saying to split the wires, but since the wires going to these pins are all combined to take up the first 3 pins, I'm not sure how to approach it.

Hello
Is it possible to test this Board to check the functionality?
I`m not shure if this board function correctly!

Greatings from switzerland

Hi, I am looking to find a similar rover in New Zealand. Is there anyone in either NZ or Australia who can help find such a rover?

Thanks.

I have just finished building my Diddy Borg Red and I am a bit confused. I have been trying to run the diddy sequence example and when I run the code it says that there is no module called PicoBorgRev. I have read all the instructions that are needed for this program and I have tried re-installing the Picoborg Reverse, SSH and i2C but it still doesn't work. It would be really helpful if someone could help me with this.

Hello
I use at the moment a ps3 for driving and the WebUI for the Camera!
To use it correctly i load the scripts via VNC because if i load the PS3 Script via SSH it has a Problem (see also another Thread https://www.piborg.org/node/2225 )
When the script is loaded i can drive <2 min. and after i loose the BT Connection!

Is there an idea to solve the Problem?

Thanks

Hello
What does that mean?